Daikin FXAA25AUV1B handleiding
Handleiding
Je bekijkt pagina 15 van 28

12 Unit installation
Installation and operation manual
15
FXAA15~63AUV1B
VRV system air conditioner
3P622285-1C – 2022.02
CAUTION
Appliance NOT accessible to the general public, install it in
a secured area, protected from easy access.
This unit, both indoor and outdoor, is suitable for
installation in a commercial and light industrial
environment.
▪ Wall strength. Check whether the wall is strong enough to
support the weight of the unit. If there is a risk, reinforce the wall
before installing the unit.
▪ Spacing. Mind the following requirements:
≤120
≥90
≥30
a
b ≥2500
≥50 ≥50
≥90
(mm)
a Obstruction
b Minimum distance to the floor
NOTICE
NEVER mount the indoor unit directly on the wall. Use the
attached mounting plate for installation.
12.2 Opening and closing the unit
12.2.1 To remove the front panel
1 Open the front panel. Hold the front panel by the panel tabs on
both sides and open until the panel stops.
a
a Panel tabs
2 Remove the front panel by pushing hooks on either side of the
front panel towards the side of the unit and remove the panel.
Or remove it by sliding the front panel either to the left or right
and pulling it forward.
a
a
a
a Panel hook
12.2.2 To re-install the front panel
1 To attach the front panel, align the hooks of the front panel with
the slots and push them all the way in.
2 Close the front panel slowly.
12.2.3 To remove the front grille
CAUTION
Wear adequate personal protective equipment (protective
gloves, safety glasses,…) when installing, maintaining or
servicing the system.
1 Remove the front panel("12.2.1 To remove the front
panel"[415]).
2 Remove the screws.
▪ 2 for FXAA15~32
2×
▪ 3 for FXAA40~63
3×
3 Push down the 3 upper hooks marked with a symbol with 3
circles in the direction of the arrows. Remove cardboard
between the filter and the heat exchanger.
a
b
a Hook
b Cardboard
4 Making sure not to catch the horizontal flaps, remove the front
grille by pulling in the direction of the arrow.
12.2.4 To re-install the front grille
1 Install the front grille and firmly engage the 3 upper hooks.
2 Install the screws back (2 for FXAA15~32 and 3 for
FXAA40~63).
3 Re-install front panel ("12.2.2 To re-install the front
panel"[415]).
Bekijk gratis de handleiding van Daikin FXAA25AUV1B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Daikin |
Model | FXAA25AUV1B |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 4375 MB |