Handleiding
Je bekijkt pagina 29 van 72

4 | Before operation
User reference guide
29
FTXJ-A(W)(S)(B)
Daikin room air conditioner
4P518786-9J – 2022.05
4.5.4 To set automatic send after select
1 In the wireless remote control setting menu, navigate to the automatic send
after select setting using and .
Minimum: 0seconds
3
0
Maximum: 3seconds
3
0
2 Change the setting using and . Minimum is 0seconds and maximum is
3seconds. The value changes by 1second with each step.
4.5.5 To set a different channel of the indoor unit infrared signal receiver
In case 2 indoor units are installed in 1 room, you can change the channel for the
infrared signal receiver on the indoor unit to avoid the wireless remote control
signal confusion.
Prerequisite: Perform the following setting for only 1 of the units.
1 In the wireless remote control settings menu, navigate to the channel
selection setting using and .
2 Change the setting to channel 2 using and .
Channel 1 Channel 2
3 Confirm your selection using .
Result: The Daikin eye will start to blink.
4 Press the indoor unit ON/OFF switch while the Daikin eye is blinking.
a
a ON/OFF switch
INFORMATION
If the setting could NOT be completed while the Daikin eye was blinking, repeat the
setting process from the beginning.
Bekijk gratis de handleiding van Daikin FTXJ35A2V1BW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Daikin |
Model | FTXJ35A2V1BW |
Categorie | Airco |
Taal | Nederlands |
Grootte | 9549 MB |