Handleiding
Je bekijkt pagina 30 van 72
5 | Operation
User reference guide
30
FTXJ-A(W)(S)(B)
Daikin room air conditioner
4P518786-9J – 2022.05
5 Operation
INFORMATION
The indoor unit is delivered with the wireless remote control as the user interface.
This manual describes only operation with this user interface. If another user
interface is connected, refer to the operation manual of the connected user
interface.
5.1 Operation range
Use the system in the following temperature and humidity ranges for safe and
effective operation.
Cooling and drying
(a)(b)
Heating
(a)
Outdoor temperature for RXJ
models
–10~50°CDB –20~24°CDB
–21~18°CWB
Outdoor temperature for
2MXM, 3MXM, 4MXM, 5MXM
models
–10~46°CDB –15~24°CDB
–15~18°CWB
Indoor temperature 18~37°C DB
14~28°CWB
10~30°CDB
Indoor humidity ≤80%
(a)
—
(a)
A safety device might stop the operation of the system if the unit runs outside its
operation range.
(b)
Condensation and water dripping might occur if the unit runs outside its operation range.
5.2 When to use which feature
You can use the following table to determine which features to use:
Basic feature
Automatic
Cooling
Heating
Fan only
Drying
"5.3Operation mode and temperature setpoint"[432]
To start/stop the system and to set the temperature:
▪ In automatic mode, an appropriate temperature and operation
mode is automatically selected.
▪ In cooling mode, cool down a room.
▪ In heating mode, heat up a room.
▪ In fan only mode, blow air in a room without heating or cooling.
▪ In drying mode, decrease the humidity in a room.
Bekijk gratis de handleiding van Daikin FTXJ20A2V1BW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | FTXJ20A2V1BW |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 9549 MB |
