Daikin FTXA50C2V1BW handleiding
Handleiding
Je bekijkt pagina 38 van 60
5 | Operation
User reference guide
38
CTXA-C(W)(B)(S) + FTXA-C(W)(B)(S)
Daikin room air conditioner
4P518786-10K – 2023.05
2 Press to confirm the selection.
Result: “Beep” sound is heard when the unit receives signal.
3 Check the indoor unit LED.
…lamp is blinking. Status
Timer Communication is OK
Operation and timer Communication is OFF
4 Press to exit the menu.
Result: The display will return to the default screen.
To connect the wireless LAN to your home network
The wireless adapter can be connected to your home network using the:
▪ WPS button (Wi-Fi Protected Setup) on the router (if present),
▪ The SSID (Service Set Identifier) and the KEY (password) - located on the unit.
To connect using the WPS button
1 Hold for at least 5seconds in the default screen.
Result: The confirmation display (menu ) appears.
2 Press repeatedly or until the WPS setting display (menu ) appears.
3 Press to confirm the selection.
Result: “Beep” sound is heard when the unit receives signal.
4 Press the WPS button on your communication device (e.g. router) within
approximately 1minute. Refer to the manual of your communication device.
INFORMATION
If the connection with your router is not possible, try procedure "To connect using
SSID and KEY number"[438].
5 Press to exit the menu.
Result: The display will return to the default screen.
To connect using SSID and KEY number
1 Hold for at least 5seconds in the default screen.
Result: The confirmation display (menu ) appears.
2 Press repeatedly or until the AP mode display (menu ) appears.
Bekijk gratis de handleiding van Daikin FTXA50C2V1BW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | FTXA50C2V1BW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7595 MB |
