Handleiding
Je bekijkt pagina 19 van 45
English 17
After energy saving function is turned on, press Function button into energy saving function and press
Enter/Cancel button to cancel this function.
The energy saving setting is shown in the Fig.5.10.
Press “Function” button
into cooling save function
Press “Mode” button into
heating save function
Turn on the unit, without
turning on save function
Press “Enter/Cancel” button
to turn off save function
Press “ ” or “ ” button
to change the lower limit
of cooling
Press “ ” or “ ” button
to change the upper limit
of heating
5.10 Energy Saving SettingFig.
Note:
In auto running mode with save function on, the unit will forcibly quit auto running mode and change to 1.
current operation mode. After setting of SAVE, sleep function will be canceled.
In save mode, if 2. Function button is pressed or there is not any operation within 5s after the last button
operation, the system will quit from save function setting and current data won’t be memorized.
After power failure and then recovery, save function setting will be memorized. 3.
The lower limited value in cooling mode is 16°C and the upper limited value in heating mode is 30°C.4.
After save setting, if the setting temperature is out of the range in the mode, the limited value will prevail.5.
01_EN_EM09A058A.indd 1701_EN_EM09A058A.indd 17 5/13/2010 11:43:22 AM5/13/2010 11:43:22 AM
Bekijk gratis de handleiding van Daikin FDM-PV1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | FDM-PV1 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 6537 MB |
