Handleiding
Je bekijkt pagina 16 van 68
EWWQ090G ÷ EWWQ720L - R410a - Water-cooled scroll chillers
EWLQ090G ÷ EWLQ720L - R410a - Condenser less
EWHQ100G ÷ EWHQ400G - R410a - Heat pump scroll chillers
EWAQ- - R410a - Air-cooled scroll chillers
EWAQ-G - R410a - Air-cooled scroll chillers
EWYQ- - R410a - Air-cooled scroll heat pumps
Air and Water cooled scroll chillers & heat pump
Operation
Manual
Operation Manual
16
EWWQ - EWLQ - EWHQ
EWAQ - EWYQ
Air or Water cooled scroll chiller &
heat pump
D-EOMHW00106-15EN
The active item is highlighted in contrast, in this example the item highlighted in Main Menu is a
link to another page. By pressing the button 6, the HMI will jump to a different page. In this case
the HMI will jump to the Enter Password page.
E
n
t
e
r
P
a
s
s
w
o
r
d
2
/
2
E
n
t
e
r
P
W
*
*
*
*
3.3 Passwords
The HMI structure is based on access levels that means that each password will disclose all the
settings and parameters allowed to that password level. Basic information about the status
including the active alarm list, active setpoint and controlled water temperature can be accessed
without the need to enter the password.
The UC handles two level of passwords:
USER
5321
MAINTENANCE
2526
The following information will cover all data and settings accessible with the maintenance
password. User password will disclose a subset of the settings explained in chapter 4.
In the Enter Password screen, the line with the password field will be highlighted to indicate that
the field on the right can be changed. This represents a setpoint for the controller. Pressing the
wheel or button 6 the individual field will be highlighted to allow an easy introduction of the numeric
password. By changing all fields, the 4 digits password will be entered and, if correct, the additional
settings available with that password level will be disclosed.
E
n
t
E
r
P
a
s
s
w
o
r
d
2
/
2
E
n
t
e
R
P
W
5
*
*
*
The password will time out after 10 minutes and is cancelled if a new password is entered or the
control powers down. Entering an invalid password has the same effect as continuing without a
password.
Once a valid password has been entered, the controller allows further changes and access without
requiring the user to enter a password until either the password timer expires or a different
password is entered. The default value for this password timer is 10 minutes.
3.4 Editing
Only line with highlighted value field can be edited, through the right buttons it is possible selected
and modify the value.
Bekijk gratis de handleiding van Daikin EWAQ-G-SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | EWAQ-G-SS |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 11467 MB |
