Handleiding
Je bekijkt pagina 29 van 78
D-EOMAC01905-23_01EN- 29/78
4.12 Controller IP Setup
The Controller IP Setup page is located at the path Main Menu → View/Set Unit → Controller IP Setup.
All the information about current MT4 IP Network settings is reported in this page, as shown in the following table:
Parameter
Range
Description
DHCP
On
The DHCP option is enabled.
Off
The DHCP option is disabled.
IP
xxx.xxx.xxx.xxx
The current IP address
Mask
xxx.xxx.xxx.xxx
The current Subnet Mask address.
Gateway
xxx.xxx.xxx.xxx
The current Gateway address.
PrimDNS
xxx.xxx.xxx.xxx
The current Primary DNS address.
ScndDNS
xxx.xxx.xxx.xxx
The current Secondary DNS address.
Device
POLxxx_xxxxxx
The Host Name of the MT4 controller.
MAC
xx-xx-xx-xx-xx-
xx
The MAC address of the MT4 controller.
To modify the MT4 IP Network configuration, do the following operations:
• access the Settings menu
• set the DHCP option to Off
• modify the IP, Mask, Gateway, PrimDNS and ScndDNS addresses, if needed, taking care of the current
network settings
• set Apply changes parameter to Yes to save the configuration and restart the MT4 controller.
The default internet configuration is:
Parameter
Default Value
IP
192.168.1.42
Mask
255.255.255.0
Gateway
192.168.1.1
PrimDNS
0.0.0.0
ScndDNS
0.0.0.0
Note that if the DHCP is set to On and the MT4 internet configurations shows the following parameter values
Parameter
Value
IP
169.254.252.246
Mask
255.255.0.0
Gateway
0.0.0.0
PrimDNS
0.0.0.0
ScndDNS
0.0.0.0
then an internet connection problem has occurred (probably due to a physical problem, like the Ethernet cable breaking).
Bekijk gratis de handleiding van Daikin EWAH990TZXRB2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | EWAH990TZXRB2 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 11657 MB |
