Daikin EKRRVATU1BA handleiding

52 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 28 van 52
7 | Troubleshooting
Application Guide
28
EKRACP* + EKRCTR* + EKRMIB* + EKRRVA* + EKRSEN* + EKRSIB* +
EKRUFH*
Daikin Home Controls
4P701747-1A – 2023.10
4 Release the system button.
5 Long press the system button again until the LED lights up green.
6 Release the system button to finish the procedure.
7.1.8 To reset the DHC Basic IO Box
1 Long press the system button until the LED quickly starts flashing orange.
2 Release the system button.
3 Long press the system button again until the LED lights up green.
4 Release the system button to finish the procedure.
7.1.9 To reset the DHC Floor Heating Controller — 6 zones
1 Long press the system button until the LED quickly starts flashing orange.
2 Release the system button.
3 Long press the system button again until the LED lights up green.
4 Release the system button to finish the procedure.
7.1.10 To reset the DHC Multi IO Box
1 Long press the system button until the LED quickly starts flashing orange.
2 Release the system button.
3 Long press the system button again until the LED lights up green.
4 Release the system button to finish the procedure.
7.2 Unreachable devices
INFORMATION
It is recommended to keep devices nearby the DHC Access Point when adding them
in the ONECTA app.
It is possible that a device appears as unreachable in the ONECTA app after it was
placed at its intended location. This indicates that the device cannot be reached by
the DHC Access Point. You can verify with the EQ3-RFA if the wireless signal of the
DHC Access Point is strong enough (see "RF analyser"[45]). If it is NOT, you need
to add a Pluggable switch and meter (HmIP-PSM) to your ONECTA system to
extend the range of the DHC wireless network (see "1.4 About supported
devices" [4 8]) Place the HmIP-PSM in between the DHC Access Point and the
desired location of the unreachable device, and activate the RF range extender
function. Once you activated the RF range extender, the ONECTA app will be able
to show the device in the DHC device list.
INFORMATION
It is NOT recommended to have more than 2 RF range extenders activated in a home.

Bekijk gratis de handleiding van Daikin EKRRVATU1BA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkDaikin
ModelEKRRVATU1BA
CategorieNiet gecategoriseerd
TaalNederlands
Grootte7259 MB