Daikin EKMBUHCA9W1 handleiding
Handleiding
Je bekijkt pagina 15 van 24
4 Operation
User reference guide
15
EBLQ05+07CAV3 + EDLQ05+07CAV3 + EKCB07CAV3 +
EK2CB07CAV3 + EKMBUHCA3V3 + EKMBUHCA9W1
Daikin Altherma low temperature monobloc
4P405545-1 – 2015.03
INFORMATION
If glycol is present in the system, then the produced energy
will NOT be displayed.
4.6.5 Configuring date, time, units of
measurement, contrast and backlight
To configure time and date
Prerequisite: You switched the permission level to Advanced end
user.
1 Go to [1]: > Set time/date.
INFORMATION
Switch to Adv. end user to change daylight saving time and
12/24h notation.
To configure units of measurement
Prerequisite: You switched the permission level to Advanced end
user.
1 Go to [7.6]: > User settings > Unit of measurement.
Possible units of measurement settings
Setting Possible units of measurement
Decimal point ▪ Dot
▪ Comma
Temperature ▪ °C
▪ °F
Produced energy ▪ kWh
▪ MBtu
Flow ▪ l/min
▪ GPM
To configure the contrast of the user interface
Prerequisite: You switched the permission level to Advanced end
user.
1 Go to [7.1.1]: > User settings > Display > Contrast.
To configure the backlit LCD time of the user interface
Prerequisite: You switched the permission level to Advanced end
user.
1 Go to [7.1.2]: > User settings > Display > Backlit LCD time.
4.6.6 Configuring user profile and home pages
To set a user profile
Prerequisite: You switched the permission level to Advanced end
user.
1 Go to [7.1.3]: > User settings > Display > User profile.
2 Select a user profile and press .
Possible user profiles
If user profile = Detailed, you can see and do more on the home
pages.
User profile Example
Basic
15:20
20.0°C
Mon
Room
Actual temperature
User profile Example
Detailed
15:20
20.0°C
17:30
Actual temperature
Room
Scheduled
Mon
Tue
To configure which home pages are made available to the
enduser
Prerequisite: You switched the permission level to Advanced end
user.
1 Go to [7.1.4]: > User settings > Display > Available home
pages.
Result: The home pages that are possible for your system
layout are listed.
2 Select a home page and press .
3 Do one of the following:
▪ To display the home page, select Yes and press .
▪ To hide the home page, select No and press .
4.7 Preset values and schedules
4.7.1 Using preset values
About preset values
You can define preset values for multiple controls. Preset values
make it easy to use the same value in many places (schedules and
room temperature home page ( and )). If you later want to change
the value, you only have to do it in one place.
To define preset values
1 Go to [7.4]: > User settings > Preset values.
2 Select for which control you want to define a preset value.
Example: Room temperature.
3 Select a preset value and press . Example: Comfort
(heating).
4 Select a temperature and press .
Possible preset values
Control Preset value Where used
Room
temperature
Comfort ▪ Room temperature
schedules
▪ Room temperature home
page ( and ) if user
profile = Detailed
Eco
LWT main Comfort Main leaving water
temperature schedules
Eco
Tank
temperature
Storage comfort DHWtank temperature
schedule if DHWtank mode
is
▪ Scheduled
▪ Scheduled + reheat
Storage eco
Reheat DHWtank temperature
schedule if DHWtank mode
= Scheduled + reheat
Quiet level Used when quiet mode is
set to On
Bekijk gratis de handleiding van Daikin EKMBUHCA9W1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | EKMBUHCA9W1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3332 MB |
