Daikin EKMBPP1A handleiding
Handleiding
Je bekijkt pagina 13 van 40
5 Installation
Installation manual
13
EKMBPP1+EKMBPP1A
Modbus adapter
4P720139-1C – 2024.11
▪ The cable glands on top of the box.
▪ X1A connector to the left.
▪ X7M connector below the cable glands.
▪ X2M connector to the right.
7 Provide wire strain relief.
▪ Inside the box: Tighten the cable glands. Leave enough cable slack
inside the installation box before tightening.
8 Close the box with the screw provided in the KRP1BC101 kit.
9 Follow the installation instructions of the KRP1BC101 installation box.
Make sure the box is mounted onto the indoor unit for earthing as
described in the KRP1BC101 manual.
5.3.2 To install the Modbus adapter PCB with field
supplied casing
In case of field supplied casing, EKMBPP1(A) MUST be installed using:
▪ A double insulated plastic box, or
▪ A metal box which is earthed properly to be compliant to the
applicable electrical safety norm.
DANGER: RISK OF ELECTROCUTION
Connect the earth wires correctly. Possible consequence:
electrocution.
5.4 Connecting the electrical wiring
DANGER: RISK OF ELECTROCUTION
Do NOT connect or turn on power supply before you have
mounted the adapter, connected the electrical wiring and have
closed the adapter.
Bekijk gratis de handleiding van Daikin EKMBPP1A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | EKMBPP1A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3665 MB |
