Daikin EKMBDXB7V1 handleiding
Handleiding
Je bekijkt pagina 40 van 56
4P642495-1– 2020.10 Page 39 of 52
0
User interface
button On
Lock
0: Enabled
1: Disable
Note: for * Split (with KRP928BB2S), User interface
On/off lock
(Note: There is no related input register with actual value)
Additional information concerning the lock function.
Situation 1: A DIII unit that lost communication to Modbus Interface DIII (due to wire communication problem
or power outage of Modbus InterfaceDIII):
Consequence: After some minutes, the lock will automatically be de-acivated by the DIII unit.
Modbus Interface DIII required actions to return to the previous state:
In case Modbus Interface DIII also had a power outage:
After the power is restored and the DIII unit is discovered then re-activation (holding register
set) of lock functions is required.
In case Modbus Interface DIII lost communication with DIII unit:
After re-discovery, de-activation (holding register reset) and re-activation (holding register
set) of lock functions is required.
Situation 2: A power outage of a DIII unit only
Consequence: After the power is restored, the lock is automatically activated again.
Modbus Interface DIII required actions: none
Situation 3: A power outage of a DIII unit and Modbus Interface DIII at the same time:
Consequence: After the power is restored, the lock is de-acivated.
Modbus Interface DIII required actions to return to the previous state:
After the power is restored and the DIII unit is discovered, re-activation (holding register set)
of lock functions is required.
Bekijk gratis de handleiding van Daikin EKMBDXB7V1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | EKMBDXB7V1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7895 MB |
