Daikin EKMBDXB7V1 handleiding
Handleiding
Je bekijkt pagina 16 van 56
4P642495-1– 2020.10 Page 15 of 52
2.3 Communication procedure
2.3.1 System initialisation
At startup:
- All input registers have values 0.
After the discovery of the DIII connected units, the “DIII unit connected status bit” (see Input registers 30002
till 30006) will be updated to “1: connected“ and the input registers of the connected DIII units (30001 and
higher) will have the correct values.
- All the holding registers have initial values 0.
After the discovery of the DIII connected units, the “DIII unit connected status bit” (see input registers 30002
till 30006) will be updated to “1: connected” and the holding registers of the connected DIII units (42001 and
higher) will be updated to the actual values once.
Attention: The holding values receive the actual values at the detection time only. This means this will only
happen once. (Remark: also not during rediscovery)
Retrieve status
Return: Busy
Check Modbus Interface DIII status (30001)
BMS
Modbus Interface DIII
DIII unit
Power on
Power on
Modbus Interface DIII status
(30001 bit 0): Busy
Return: Ready
Check Modbus Interface DIII status (30001)
Modbus Interface DIII status
(30001 bit 0): Ready
Return: Ready
Check DIII unit connected status (30002-5)
Check status when
Modbus Interface
DIII is ready
BMS gets all DIII
units connected
addresses
Return values
Check DIII unit capabilities
BMS gets all DIII
units capabilities
BMS gets all DIII
units current
status by reading
the input registers
and read all
values of the
holding registers
Return values
Check DIII unit status (input registers) & read
holding registers
Bekijk gratis de handleiding van Daikin EKMBDXB7V1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | EKMBDXB7V1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7895 MB |
