Daikin EHVH11S26CBV handleiding
Handleiding
Je bekijkt pagina 15 van 24
4 Operation
User reference guide
15
EHBH04~16CBV + EHVH04~16S18+26CBV
Daikin Altherma – Low temperature split
4P449972-1 – 2016.06
INFORMATION
You can only change the From and Until settings in the
End user level. For changing the other settings, you have
to switch to Adv. end user level.
To activate or deactivate the holiday mode
Prerequisite: You have configured the holiday.
1 Go to [2.1]: > Holiday > Holiday.
2 Do one of the following:
▪ To activate, select Yes and press .
▪ To deactivate, select No and press .
Usage example: You go away during the winter
If you are in the following situation:
▪ In 2days, you go away for 2weeks during the winter.
▪ You want to save energy, but prevent your house from freezing.
Then you can do the following:
Prerequisite: You switched the permission level to Advanced end
user.
1 Configure the holiday. Go to [2]: > Holiday, and configure
the following settings:
Setting Value
Holiday mode Away
From 2 February 2014
Until 16 February 2014
Operation mode Heating
Heating 12°C
2 Activate the holiday mode.
▪ Go to [2.1]: > Holiday > Holiday.
▪ Select Yes and press .
Advantage:
▪ Before and after your holiday, your normal schedule will be used.
▪ During your holiday, you save energy and prevent your house
from freezing.
Usage example: You come home during your holiday
If you are in the following situation:
▪ You configured and activated the holiday mode (Away).
▪ During your holiday, you come home for a few hours and want to
use your normal schedule.
Then you can do the following:
1 Deactivate the holiday mode.
2 When you go away again, activate the holiday mode again.
Advantage:
You do NOT have to change your schedule or holiday configuration.
4.6.4 Reading out information
To read out information
Prerequisite: You switched the permission level to Advanced end
user.
1 Go to [6]: > Information.
Possible read-out information
In menu… You can read out…
[6.1] Sensor information Room, tank or DHW, outside,
and leaving water temperature.
(If applicable)
[6.2] Energy metering Produced energy, consumed
electricity, and consumed gas.
[6.3] Error handling Error history and contact/
helpdesk number.
[6.4] User permission level Current user permission level.
[6.5] Actuators Status/mode of each actuator.
Example: Domestic hot water
pump ON/OFF.
[6.6] Operation modes Current operation mode.
Example: Defrost/oil return
mode.
[6.7] Running hours Running hours of the system.
[6.8] Version Version information about the
system.
4.6.5 Configuring date, time, units of
measurement, contrast and backlight
To configure time and date
Prerequisite: You switched the permission level to Advanced end
user.
1 Go to [1]: > Set time/date.
INFORMATION
Switch to Adv. end user to change daylight saving time and
12/24h notation.
To configure units of measurement
Prerequisite: You switched the permission level to Advanced end
user.
1 Go to [7.6]: > User settings > Unit of measurement.
Possible units of measurement settings
Setting Possible units of measurement
Decimal point ▪ Dot
▪ Comma
Temperature ▪ °C
▪ °F
Produced energy ▪ kWh
▪ MBtu
Flow ▪ l/min
▪ GPM
To configure the contrast of the user interface
Prerequisite: You switched the permission level to Advanced end
user.
1 Go to [7.1.1]: > User settings > Display > Contrast.
To configure the backlit LCD time of the user interface
Prerequisite: You switched the permission level to Advanced end
user.
1 Go to [7.1.2]: > User settings > Display > Backlit LCD time.
4.6.6 Configuring user profile and home pages
To set a user profile
Prerequisite: You switched the permission level to Advanced end
user.
Bekijk gratis de handleiding van Daikin EHVH11S26CBV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | EHVH11S26CBV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3508 MB |
