Dahua Technology N83BP83 handleiding
Handleiding
Je bekijkt pagina 88 van 241
Operation Manual
74
●
The red line in the waveform indicates that the motion detection is triggered,
and the green one indicates that there is no motion detection. Adjust
sensitivity and threshold according to the waveform.
3) Click OK.
Step 4 Set arming periods and alarm linkage action. For details, see "6.5.1.2 Alarm Linkage"
.
If the exiting schedules cannot meet the scene requirement, you can click Add
Schedule to add a new schedule. For details, see "6.5.1.2.1 Adding Schedule".
Anti-dither: After the Anti-dither time is set, the system only records one motion
detection event in the period.
Step 5 C
lick Apply.
6.5.3.2 Setting Video Tampering
The system performs alarm linkage when the lens is covered or video output is mono-color
screen caused by light and other reasons.
Procedure
Step 1 Select > Event > Video Detection > Video Tampering.
Step 2 Select the event type.
●
Video Tampering: When the percentage of the tampered image and the duration
exceed the configured values, an alarm will be triggered.
●
Defocus Detection: When the image is blurred, an alarm will be triggered. This
function is available on select models.
Figure 6-65 Video tampering
Bekijk gratis de handleiding van Dahua Technology N83BP83, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dahua Technology |
| Model | N83BP83 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 39346 MB |
