Dahua Technology N83BP83 handleiding
Handleiding
Je bekijkt pagina 57 van 241
Operation Manual
43
Table 6-11 Description of audio parameters
Parameter Description
Compression
You can select audio Encode Mode from PCM, G.711A, G.711Mu,
G.726, AAC, G.723.
The configured audio encode mode applies to both audio and
intercom. The default value is recommended.
Sampling Frequency
Sampling number per second. The higher the sampling frequency
is, the more the sample in a second will be, and the more accuracy
the restored signal will be. You can select audio Sampling
Frequency from 8000, 16000, 32000, 48000, 64000.
Audio Input Type
You can select audio input type from:
ā
LineIn: Requires external audio device.
ā
Mic: Not require external audio device.
Noise Filter Enable this function, and the system auto filters ambient noise.
Microphone Volume Adjusts microphone volume.
Speaker Volume Adjusts speaker volume.
Step 4 Click Apply.
6.2.4.2 Setting Alarm Tone
You can record or upload alarm audio file. The audio file will be played when the alarm is
triggered.
Procedure
Step 1 Select > Camera > Audio Tone.
Figure 6-33 Audio tone
Step 2 C
lick Add.
Step 3 Configure the audio file.
Bekijk gratis de handleiding van Dahua Technology N83BP83, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dahua Technology |
| Model | N83BP83 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 39346 MB |
