Dahua Technology N83BP83 handleiding
Handleiding
Je bekijkt pagina 39 van 241
Operation Manual
25
Figure 6-10 Light
Step 2 Configure illuminator parameters.
Table 6-7 Description of illuminator parameters
Parameter Description
Fill Light
Set Fill Light for sound and siren cameras.
●
IR Mode: Enable the IR illuminator, and the white light is disabled.
When an alarm is triggered, the system will link white light.
●
White Light: Enable the white light, and the IR illuminator is disabled.
When an alarm is triggered, the system will link white light.
●
Soft Light Mode: Enable IR illuminator and white light at the same
time, and adjust the brightness of the two illuminators to get clear
images.
Mode
Manual
Adjust the brightness of illuminator manually,
and then the system will supply illuminator to
the image accordingly.
Auto
The system adjusts the illuminator intensity
according to the ambient lighting condition.
Zoom Priority
The system adjusts the illuminator intensity
automatically according to the change of the
ambient light.
●
When the ambient light turns darker, the
system turns on the low beam lights first, if
the brightness is still not enough, it turns on
the high beam lights then.
●
When the ambient light turns brighter, the
system dims high beam lights until they are
off, and then the low beam lights.
●
When the focus reaches certain wide angle,
the system will not turn on high beam light
in order to avoid over-exposure in short
distance. In the meantime, you can
configure light compensation manually to
fine-tune IR light intensity.
Off Illuminator is off.
Step 3 Click Apply.
Bekijk gratis de handleiding van Dahua Technology N83BP83, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dahua Technology |
| Model | N83BP83 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 39346 MB |
