Dahua Technology N83BP83 handleiding
Handleiding
Je bekijkt pagina 102 van 241
Operation Manual
88
Step 2 Configure parameters.
Figure 6-82 Serial port settings
Table 6-30 Description of serial port settings parameters
Parameter Description
IP Address
Enter the corresponding device address. It is 1 by default.
Make sure that the address is the same as the device address;
otherwise you cannot control the device.
Baud Rate Configure device baud rate. It is 9600 by default.
Data Bits It is 8 by default.
Stop Bits It is 1 by default.
Parity It is None by default.
Step 3 Click Apply.
6.7.4.2 Configuring External Light
You need to configure external light mode when the external light is used.
Prerequisites
ā
Connect external light with RS-485 port.
ā
You have configured serial port parameters. For details, see "6.7.4.1 Configuring Serial
Port".
Procedure
Step 1 > System > Peripheral > External Light.
Step 2 Select working mode as needed.
Bekijk gratis de handleiding van Dahua Technology N83BP83, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dahua Technology |
| Model | N83BP83 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 39346 MB |
