Dahua Technology N42DJS2 handleiding
Handleiding
Je bekijkt pagina 203 van 228
190
Procedure
Step 1 Select
Setting
>
Event
>
Stereo Analysis
>
Zoom Configuration
.
Step 2 Configure the zoom.
●
Method 1: Click
Calibration Area
, and then draw a rectangular box in the image, which
is size of the enlarged image of sub stream 1.
●
Method 2: Set the zoom value. For example, if you want the target to be 1/5 of the
image, set the zoom value to 5.
●
When calibrating the zoom for Stand Detection, make sure that there is 1 person in the
image at least.
●
When calibrating the zoom for People No. Error, make the calibration box in the center
of the image, and the zoom value larger than 3. Some models only support calibration
by drawing calibration area.
Figure 5-81 Calibration configuration (stereo analysis)
Step 3 Click
Save.
5.15.4 Viewing Report
Working with a recording & broadcasting server, the camera monitors the target's positions in the
front of the classroom and analyzes the data, and then generates a report.
Prerequisites
You have set at least one rule in
Setting
>
Event
>
Stereo Analysis
>
Stereo Analysis
.
Procedure
Step 1 Select
Setting
>
Event
>
Stereo Analysis
>
Report
.
Step 2 Select the start time and end time.
You can search for reports within the time range of 30 minutes–24 hours.
Step 3 Set the number of screen sections.
We recommend splitting the window into 2
ⁿ
windows.
Bekijk gratis de handleiding van Dahua Technology N42DJS2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dahua Technology |
| Model | N42DJS2 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 51658 MB |
