Dahua Technology N42DJS2 handleiding
Handleiding
Je bekijkt pagina 138 van 228
125
Figure 5-5 Record control
Step 2 Set parameters.
Table 5-1 Description of record control parameters
Parameter Description
Pack Duration The time for packing each video file.
Pre-event Record
The time to record the video in advance of a triggered alarm event.
For example, if the pre-event record is set to be 5 s, the system
saves the recorded video of 5 s before the alarm is triggered.
When an alarm or motion detection links recording, and the
recording is not enabled, the system saves the video data within
the pre-event record time to the video file.
Disk Full
Recording strategy when the disk is full.
ā
Stop
: Stop recording when the disk is full.
ā
Overwrite
: Cyclically overwrite the earliest video when the disk
is full.
Record Mode
When you select
Manual
, the system starts recording; when you
select
Auto
, the system starts recording in the configured time
period of record plan.
Record Stream
Select record stream, including
Main Stream
and
Sub Stream
.
Step 3 Click
Save
.
5.1.1.2.3 Setting Record Linkage
On the alarm event setting interface (such as the motion detection interface), select
Record
and set
Record Delay
to set alarm linkage and record delay.
After
Record Delay
is configured, alarm recording continues for an extended period after the alarm
ends.
Figure 5-6 Record linkage
5.1.1.3 Snapshot Linkage
After snapshot linkage is configured, the system can automatically alarm and take snapshots when
an alarm is triggered.
After
Motion
is enabled in
Snapshot
, the system takes snapshots when an alarm is triggered. For
Bekijk gratis de handleiding van Dahua Technology N42DJS2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dahua Technology |
| Model | N42DJS2 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 51658 MB |
