Dahua Technology IVS-TB8000-E-GU1 Handleiding (85 Pagina's)

Handleiding

User's Manual

29

●

Registered Number

: The total number of the negative sample.

Step 7 Click

OK

.

The configuration is saved and applied, and the

Rule Config

page is closed.

Related Operations

●

Click

Empty

to clear all configured rules.

●

Click

Load Template

, select a template, and then click

OK

. Rule parameters are configured based

on the template.

4.5.2.6 Emergency Lane Occupation Detection

An alarm will be triggered when a vehicle occupies the emergency lane.

Procedure

Step 1 On the

Rule Config

page, select

Driving in Emergency Lane

from the

Rule Config

drop-down list.

Step 2 Click

Add

.

After you add a rule, the rule is enabled by default.

Step 3 Drag the angles to adjust the detection zone or click

to draw a detection zone.

●

The detection zone should cover the valid vehicle targets, and avoid being too large to

be interfered from other objects.

●

Click the screen to start drawing, and right-click the screen to finish drawing.

●

By default, the detection zone covers the whole image.

Figure 4-29 Emergency lane occupation detection

Step 4 Click the

Rule Parameter

tab, and then set the sensitivity.

The higher the sensitivity is, the easier an alarm is detected and triggered. The false alarm

rate also increases. We recommend you to leave it as default.

Bekijk gratis de handleiding van Dahua Technology IVS-TB8000-E-GU1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.