Dahua Technology ITSE1200-TA-N08 handleiding

Niet gecategoriseerd

Dahua Technology

17 pagina's

PDF beschikbaar

Handleiding

3.2 Changing IP Address

You can acquire and change the IP address of devices accessed through wired network. This section

uses changing IP address with the ConfigTool as the example.

Step 1 Get the ConfigTool from technical support and install it on your local computer.

Step 2 Start the ConfigTool.

Step 3 Click

Modify IP

Step 4 Select the device(s) whose IP need(s) to be changed.

●

Change one IP address: Click

Edit

corresponding to the device.

●

Change IP addresses in batches: Select the devices, and then click

Batch Modify IP

Step 5 Set mode, IP, subnet mask and gateway.

Step 6 Click

Figure 3-2 Change IP addresses in batches

3.3 Updating the Device

Single upgrade and batch upgrade are supported.

Step 1 Start the ConfigTool.

Step 2 Click

Device Upgrade

Step 3 Select the Device to be updated.

●

Update one by one: Click

corresponding to the Device.

●

Update in batches: Select multiple devices, and then click

Batch Upgrade

Step 4 Select the update file.

Step 5 Update the Device.

●

Update one by one: Click

to start updating.

●

Update in batches: Click

to start updating.

During update, if the Device is disconnected, as long as the ConfigTool stays on the update

page, the upgrade will continue when the Device is reconnected.

3.4 Logging in to Webpage

On the

Modify IP

page, click

Web

corresponding to the Device, and then you are directed to the

Bekijk gratis de handleiding van Dahua Technology ITSE1200-TA-N08, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.