Dahua Technology ITSE1200-TA-G08 handleiding

Niet gecategoriseerd

Dahua Technology

17 pagina's

PDF beschikbaar

Handleiding

III

Important Safeguards and Warnings

This section introduces content covering the proper handling of the Device, hazard prevention, and

prevention of property damage. Read carefully before using the Device, and comply with the

guidelines when using it.

Transportation Requirements

●

Pack the Device with packaging provided by its manufacturer or packaging of the same quality

before transporting it.

●

Transport the Device under allowed humidity and temperature conditions.

Storage Requirements

Store the Device under allowed humidity and temperature conditions.

Installation Requirements

●

To avoid damage to the hard disk, the Device must be carefully installed in a horizontal position.

The device must never be placed in an inclined or vertical position.

●

Do not install the Device in locations where children are likely to be present.

●

Do not connect the power adapter to the Device while the adapter is powered on.

●

Strictly comply with the local electrical safety code and standards. Make sure the ambient voltage

is stable and meets the power supply requirements of the device.

●

Do not connect the Device to two or more kinds of power supplies, to avoid damage to the

Device.

●

Use the accessories suggested by the manufacturer. Installation and maintenance must be

performed by qualified professionals.

●

When using a laser beam device, avoid exposing the surface of the Device to laser beam

radiation.

●

Personnel working at heights must take all necessary measures to ensure personal safety

including wearing a helmet and safety belts.

●

Do not place the Device in a place exposed to sunlight or near heat sources.

●

Keep the Device away from dampness, dust, and soot.

●

Put the Device in a well-ventilated place, and do not block its ventilation.

●

Use an adapter or cabinet power supply provided by the manufacturer.

●

The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no

higher than PS2. Please note that the power supply requirements are subject to the Device label.

●

The device is a class I electrical appliance. Make sure that the power supply of the Device is

connected to a power socket with protective earthing.

●

An emergency disconnect device must be installed during installation and wiring at a readily

Bekijk gratis de handleiding van Dahua Technology ITSE1200-TA-G08, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.