Dahua Technology DHI-LM32-GO43A handleiding
Handleiding
Je bekijkt pagina 5 van 22
I V
User’s Manual
○
○
The voltage must meet the SELV (Safety Extra Low Voltage) requirements and not exceed
ES-1 standards.
When the power of the device does not exceed 100 W, the power supply must meet LPS
requirements and be no higher than PS2.
◇
◇
We recommend using the power adapter provided with the device.
When selecting the power adapter, the power supply requirements (such as rated voltage) are
subject to the device label.
●
●
●
●
●
●
●
●
●
Personnel working at heights must take all necessary measures to ensure personal safety
including wearing a helmet and safety belts.
Do not place the device in a place exposed to sunlight or near heat sources.
Keep the device away from dampness, dust, and soot.
Use an adapter or cabinet power supply provided by the manufacturer.
The device is a class I electrical appliance. Make sure that the power supply of the device is
connected to a power socket with protective e
arthing.
When installing the device, make sure that the power plug can be easily reached to cut off the
power.
Install the Device on a stable surface to prevent it from falling.
Install the device in a well-ventilated place, and do not block its ventilation.
The signal output devices and the LCD Display must be on the same grounding, and the earth
impedance must be less than 1 Ω.
Operation Requirements
●
Use the standard power adapter. We will assume no responsibility for any problems caused by
the use of a nonstandard power adapter.
●
●
●
Use the power cords that are recommended for the region and conform to the rated power
specifications.
In a domestic environment this may cause radio interference in which case you may be required
to take adequate measures.
Ground the device to protective ground before you power it on.
●
●
●
●
●
●
Do not drop or splash liquid onto the device, and make sure that there is no object filled with
liquid on the device to prevent liquid from flowing into it.
Operate the device within the rated range of power input and output( Direct Current).
Do not disassemble the device without professional instruction.
Use the device under allowed humidity and temperature conditions.
Check whether the power supply is correct before use.
Operating temperature: 0 °C to 40 °C (32 °F to 104 °F).
Bekijk gratis de handleiding van Dahua Technology DHI-LM32-GO43A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dahua Technology |
| Model | DHI-LM32-GO43A |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 1531 MB |
