Dacor DDW24G9000AP handleiding
Handleiding
Je bekijkt pagina 23 van 88
STEP 5 Install the custom panel
A
1. Insert the supplied rubber skirt (A) into
the 3 holes at the bottom of the door.
Ø 2
~12
2. Put the installation template on the
back of the custom panel and x it
temporarily using transparent tape.
Note that the rear of the custom panel
will be attached to the dishwasher door.
CAUTION
• The top end of the custom panel must
be aligned with the top end of the
installation template.
• Use a custom panel between 9-44 lbs.
3. Pre-drill the 12 points marked on the
installation template using a 2-pi drill
bit to a depth of
3
/8-
1
/2" (10-12 mm).
B
B
C
C
4. Remove the installation template and
tighten the Custom panel xers - Top
(B) / Custom panel xers - Bottom (C) at
the top with 12 screws (C, Ø4 X 16) as
shown.
CAUTION
Be sure to check the direction of the
Custom panel xers - Top (B) / Custom
panel xers - Bottom (C) before installing.
English 23
Installation
DD68-00250L-00_IB_DACOR_DW8700B_EN.indd 23 2024-01-11 3:09:29
Bekijk gratis de handleiding van Dacor DDW24G9000AP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dacor |
| Model | DDW24G9000AP |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 8683 MB |