D-Link DPS-PWR740AC handleiding
Handleiding
Je bekijkt pagina 44 van 69
DMS-3130 Series Layer 3 Stackable Managed Switch Hardware Installation Guide
44
6. Web-based Switch Configuration
Introduction
Logging into the Web UI
Web User Interface (Web UI)
Introduction
Most software functions of the Switch can be managed, configured, and monitored via the embedded HTML Web UI.
Management on the Switch can be executed from remote stations anywhere on the network through a standard web
browser. The web browser acts as a universal access tool and can directly communicate with the Switch using the
HTTP or HTTPS (SSL) protocol.
The Switch supports the following web browsers:
• Internet Explorer
• Firefox
• Google Chrome
• Safari
Logging into the Web UI
To access the Web UI, open a standard web browser, enter the Switch’s IP address into the address bar of the
browser, and press the ENTER key. By default, the MGMT port, located just below the RJ45 console port, can be
accessed using the IP address of 192.168.0.1. To access the Web UI from normal LAN ports, the default IP address is
10.90.90.90.
NOTE: To configure the IP address of the Switch, refer to the Configuring the IP Address
section.
After pressing the ENTER key, the following authentication window should appear, as shown below.
Figure 6-1 Web UI Login Window
When connecting to the Web UI of the Switch for the first time, leave the User Name and Password fields blank and
click Login since there are no login user accounts created by default on this switch.
Bekijk gratis de handleiding van D-Link DPS-PWR740AC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DPS-PWR740AC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10019 MB |
