D-Link DPS-PWR740AC handleiding
Handleiding
Je bekijkt pagina 26 van 69
DMS-3130 Series Layer 3 Stackable Managed Switch Hardware Installation Guide
26
Figure 3-5 Installing an AC Power Supply Module
1. Remove the AC power cord and then press the release clip inwards to remove an existing AC PSU module.
2. Gently pull the AC PSU module out of the PSU module slot.
3. Insert a new AC PSU module into the PSU module slot until its release clip securely clicks into place.
4. Plug one end of the AC power cord into the AC power socket on the AC PSU module and the other end into a
properly grounded AC power source outlet.
The Switch will automatically receive power and adjust its power settings to adapt to a voltage supply within the
100~240VAC range at 47~63Hz.
Figure 3-6 Installed AC Power Supply Module
You can install another AC PSU module to the other PSU module slot. When one AC PSU fails, the other AC PSU will
immediately and automatically provide AC power to the Switch.
Installing DC PSU Modules
D-Link DMS-3130-30PS switches support hot-swappable DC PSU modules that you can remove and insert a PSU
module when your switch is powered on and in operation. This feature is designed to further ensure and enhance the
reliability of your switch.
When an existing DC PSU module needs to be replaced or an additional DC PSU module needs to be installed, it is
important to know the proper installation of the DC PSU module.
Bekijk gratis de handleiding van D-Link DPS-PWR740AC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DPS-PWR740AC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10019 MB |
