D-Link DMC-1002 handleiding
Handleiding
Je bekijkt pagina 5 van 21
4
Configure through Web browser
The Media Converter chassis system is accessible using a Web browser (IE
explorer, Netscape Communications, etc.) to open up the chassis monitoring
system. The default IP Address for the chassis system is “192.168.1.1”, and
the default Login name and password is both “root”.
Configuration via Serial Port
The Media Converter chassis system can be accessible using a terminal or
terminal emulator attached to the RS232 serial port on the Switch too.
NOTE: (1) The serial port cable is attached directly with the device.
(2) It needs to upgrade the Terminal Emulator due to key
malfunction.
1. Locate correct DB9 serial port cable with female DB9 connector.
2. Attach the DB9 serial port female cable connector to the male DB9 serial
port connector on the chassis system.
3. Attach the other end of the DB9 serial port cable to a remote
workstation.
4. By default, the Switch uses the following serial port parameter values:
Bits per second 57600
Stop bits 1
Data bits 8
Parity NONE
Flow Control NONE
Bekijk gratis de handleiding van D-Link DMC-1002, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DMC-1002 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1710 MB |
Caratteristiche Prodotto
| Vormfactor | Plug-in |
| Connectiviteitstechnologie | Bedraad |
| Bekabelingstechnologie | Ethernet 10Base-T, Ethernet 100Base-TX |
| Aansluitingen | 1x Ethernet 10Base-T/100Base-TX - RJ-45\n1x RS-232 |
| Temperatuur bij opslag | -25 - 70 °C |
