D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 444 van 761
DGS-6604 m/ mSW Rls. 1.00.029 service-policy
CLI Reference Guide
413
service-policy
To attach a policy map to an input interface use the service-policy command in
the interface configuration mode. To remove a service policy from an input
interface, use the no form of this command.
service-policy NAME
no service-policy NAME
Default None
Command Mode Interface configuration
Usage Guideline Only physical port interfaces are valid for this command.
Use the service-policy command to attach a single policy map to input
interfaces. This policy is attached to the interface for aggregate and controls the
number or rate of packets. The packet arriving at a port will be treated based on
the service policy attached to the interface.
A policy map needs to be created before it is specified in this command.
A policy map without a configured class policy can not be attached.
Examples In the following example shown on the next page, two policy maps are defined-
cust1-classes, and cust2-classes.
For cust1-classes, gold is configured to use CoS Queue 6 and policed by a
single rate policer with an average rate set to 64 Kbits per second and a normal
burst size set to 128 Kbytes. Silver is configured to use CoS queue 5 and policed
by a single rate policer with an average rate set to 64 Kbits per second and the
normal burst size set to 128 Kbytes. Bronze is configured to use CoS queue 0
and policed by a single rate policer with an average rate set to 64 Kbits per
second and a normal burst size set to 128K bytes.
For cust2-classes, gold is configured to use CoS Queue 6 and policed by a
single rate policer with an average rate set to 128 Kbits per second and the
normal burst size set to 256 Kbytes. Silver is policed by a single rate policer with
an average rate set to 128 Kbits per second and the normal burst size set to 256
Kbytes. Bronze is policed by a single rate policer with an average rate set to128
Kbits per second and the normal burst size set to 256 Kbytes.
Syntax Description
NAME The name of a service policy map (created using the policy-map command) to
be attached. The name can be a maximum of 32 alphanumeric characters.
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
