D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 435 van 761
DGS-6604 m/ mSW Rls. 1.00.029 router ipv6 rip
CLI Reference Guide
404
router ipv6 rip
To configure an IPv6 RIP routing process, use the router ipv6 rip command in
global configuration mode. To remove a routing process, use the no form of this
command.
router ipv6 rip
no router ipv6 rip
Syntax None
Default Not configured
Command Mode Global configuration
Usage Guideline The router ipv6 rip command is similar to the router rip command, except that it is
IPv6-specific. Use this command to enable an IPv6 RIP routing process globally.
Using this command places the router in router configuration mode for the IPv6
RIP routing process. The router prompt changes to Switch(config-router)#.
Example The following example configures the IPv6 RIP routing process and places the
router into router configuration mode for the IPv6 RIP routing process.
Switch > enable
Switch # configure terminal
Switch (config) # router ipv6 rip
Switch(config-router)# end
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
