D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 433 van 761
DGS-6604 m/ mSW Rls. 1.00.029 router-id
CLI Reference Guide
402
router-id
Use this command to specify a router ID for the OSPF process. Use the no form
of the command to revert to the automatic determination of router-id.
router-id IP-ADDRESS
no router-id
Default The router-id is automatically chosen based on the highest IP address present
on the router.
Command Mode Router configuration
Usage Guideline Router ID is a 32-bit number assigned to each router running the OSPF protocol.
This number uniquely identifies the router within an Autonomous System. Each
router must be configured with a unique router-id.
If this command is used on an active OSPF router process (already has
neighbors), the new router-ID will not take effect immediately. It will be used at
the next reload or at a manual OSPF process restart.
Example This example shows how to configure router id to 10.10.10.60
Verify the settings by entering the show ip protocols ospf command.
Syntax Description
IP-ADDRESS Specifies the router ID in IPv4 address format.
Switch# configure terminal
Switch(config)# router ospf
Switch(config-router)# router-id 10.10.10.60
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
