D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 428 van 761
DGS-6604 m/ mSW Rls. 1.00.029 revision
CLI Reference Guide
397
revision
To set the revision number for the MST configuration, use the revision command.
To return to the default settings, use the no form of this command.
revision REVISION
no revision
Default REVISION: 0
Command Mode MST configuration
Usage Guideline If Two DGS-6604 series Ethernet switches have the same configuration but with
different revision numbers, then they are considered to be part of two different
regions.
Caution: Be careful when using the revision command to set the revision
number of the MST configuration because a mistake can put the switch in a
different region.
Example This example shows how to configure the revision level of MSTP configuration to
2.
Verify the settings by entering the show spanning-tree mst configuration
command.
Syntax Description
REVISION When a switch using the same given name but with a different revision level than
another switch, then the two switches are considered members of different MST
regions. The range is 0 to 65535.
Swtich(config)# spanning-tree mst configuration
Switch(config-mst)#revision 2
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
