D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 402 van 761
DGS-6604 m/ mSW Rls. 1.00.029 power-saving
CLI Reference Guide
371
power-saving
Use the power-saving command to enable "Power Saving" function in the device.
And use the no form of this command to disable "Power Saving" function.
power-saving {phy}
no power-saving {phy}
Default Disabled
Command Mode Global configuration.
Usage Guideline The "power-saving" command can enable the "Power Saving" function on
different hardware components. Currently, one component is supported: phy.
Select the option "phy", it will set the PHY into "Power Saving" mode. The "no
power-saving" command disables this function.
The "PHY Power Saving" function could be enabled or disabled per-system
base. There are two operation modes: "low-power" mode and "normal" mode.
When power saving is enabled, the chips automatically enter "low-power" mode
if the signal from a copper link partner is lost. They will go to normal mode when
a signal is detected.
If "PHY Power Saving" function is disabled, PHY will always be in normal mode
no matter that the signal froma link partner is presented or not.
Example The following example shows how to enable/disable "Power Saving" function.
Switch(config)#power-saving
Switch(config)#
Switch(config)show power-saving
Power-saving status
============================
phy power-saving:Enabled
Switch(config)#no power-saving
Switch(config)#show power-saving
Power-saving status
============================
phy power-saving:Disabled
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
