D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 385 van 761
DGS-6604 m/ mSW Rls. 1.00.029 permit | deny (mac access-list)
CLI Reference Guide
354
permit | deny (mac access-list)
Use the permit command to define the rule for packets to be based on their MAC
address. Use the deny command to define the rule for packets that are to be
denied. Use the no permit command to remove a permit entry, and use the no
deny command to remove a deny entry.
{ permit | deny } { any | host SRC-MAC-ADDR | SRC-MAC-ADDR MASK } { any | host DST-MAC-
ADDR | DST-MAC-ADDR MASK } [ ethernet-type TYPE | llc dsap DSAP ssap SSAP cntl CNTL ]
[ dot1p PRIORITY-TAG ] [ VLAN VLAN-ID ] [ time-range PROFILE-NAME ] [ priority PRIORITY ]
no { permit | deny } { any | host SRC-MAC-ADDR | SRC-MAC-ADDR MASK } { any | host DST-
MAC-ADDR | DST-MAC-ADDR MASK } [ ethernet-typeTYPE | llc dsap DSAP
ssap SSAP cntl
CNTL ] [ dot1p PRIORITY-TAG ] [ VLAN VLAN-ID ] [ time-range ]
Default If the priority is not specified, the system assigns it with a priority value 10 or
greater than the largest sequence in that access list and it is placed at the end of
the list.
If the priority is manually assigned, it is better to have a reserved interval for a
future higher priority entry. Otherwise the system attempts to insert an entry with
a higher priority.
Syntax Description
any Specifies any source MAC address or any destination MAC address.
host SRC-MAC-ADDR Specifies a specific source MAC address.
SRC-MAC-ADDR
MASK
Specifies a group of source MAC addresses using a mask.
host DST-MAC-ADDR Specifies a specific destination MAC address.
DST-MAC-ADDR
MASK
Specifies a group of destination MAC addresses by using mask.
ethernet-typeTYPE (Optional) Specifies that the protocol type for the Ethernet_II packet or a SNAP
packet by specifying the Ethernet type value which is a number from 0 to 65535.
llc dsap DSAP ssap
SSAP cntl CNTL
(Optional) Specifies the protocol type for the LLC packet by specifying the DSAP,
SSAP and CONTROL number which is a number from 0 to 255.
dot1p PRIORITY-TAG (Optional) Priority tag in value of 0~7.
VLAN VLAN-ID (Optional) Specifies the VLAN ID which a number from 1 to 4094.
time-range PROFILE-
NAME
(Optional) Specifies the name of a time-period profile for activation of the
access-list.
With the no form of this command, this option, time-range (without PROFILE-
NAME), removes the setting of an active timer-period, rather than removing the
whole entry.
priority PRIORITY (Optional) Access entry priority range is 1 to 65535 where the lower value
represents higher priority for the sequence number. If no priority is specified, the
system automatically assigns it with a priority that is 10 greater than the largest
sequence in that access list and places it at the end of the list.
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
