D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 375 van 761
DGS-6604 m/ mSW Rls. 1.00.029 passive-interface (IPv6 OSPF)
CLI Reference Guide
344
passive-interface (IPv6 OSPF)
To disable sending IPv6 OSPF protocol packets on an interface, use the
passive-interface command. To re-enable sending and receiving routing
updates, use the no form of this command.
passive-interface IFNAME
no passive-interface IFNAME
Default Routing updates are sent and received on all interfaces where the routing
protocol is enabled.
No interfaces are configured as passive.
Command Mode Router configuration
Usage Guideline If the sending of routing updates is disabled on an interface, the particular
address prefix will continue to be advertised to other interfaces, and updates
from other routers on that interface continue to be received and processed.
IPv6 OSPF routing information is neither sent nor received through the specified
router interface. The specified interface address appears as a stub network in the
IPv6 OSPF domain.
Example The following example sets interface VLAN 1 to the passive mode:
Verify the settings by entering the show ipv6 ospf interface command.
Syntax Description
IFNAME Interface type and number i.e VLAN 1.
Switch > enable
Switch # configure terminal
Switch (config) # router ipv6 ospf
Switch (config-router)# passive-interface vlan1
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
