D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 373 van 761
DGS-6604 m/ mSW Rls. 1.00.029 next-server
CLI Reference Guide
342
next-server
Configure the next server in a DHCP client's boot process. Use the no form of
this command to remove the boot server list.
next-server IP-ADDRESS
no next-server
Default Not configured
Command Mode DHCP pool configuration
Usage Guideline The configured IP addresses of next-server are used as a boot server in the
DHCP client's boot process. Typically, servers are Trivial File Transfer Protocol
(TFTP) servers and are listed in order of preference.
Example The following is a sample of configuring 10.1.1.1 as the IP address of next-server
in the DHCP client's boot process in pool named "pool1"
Syntax Description
IP-ADDRESS The IP address of next-server in a DHCP client's boot process.
switch# configure terminal
switch(config)# ip dhcp pool pool1
switch(config-dhcp)# next-server 10.1.1.1
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
