D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 369 van 761
DGS-6604 m/ mSW Rls. 1.00.029 netbios wins-server
CLI Reference Guide
338
netbios wins-server
To configure the IP address of a WINS server for Microsoft Dynamic Host
Configuration Protocol (DHCP) clients. Use the no form of this command to
remove the configuration of WINS server.
netbios wins-server [IP-ADDRESS]
no netbios wins-server [IP-ADDRESS]
Default Not configured
Command Mode DHCP pool configuration
Usage Guideline This command is used to configure a primary and secondary WINS server. The
primary preference is the old WINS. The maximum number of configurable WINS
servers is dependent on each project.
Examples The following example configures a primary WINS server as 10.1.1.100.
The following example configures a secondary WINS server as 10.1.1.200.
The following example removes the WINS server 10.1.1.100 so that 10.1.1.200
becomes the primary WINS server.
Syntax Description
IP-ADDRESS The IP address of the WINS server.
switch(config-dhcp)#netbios wins-server 10.1.1.100
switch(config-dhcp)#netbios wins-server 10.1.1.200
switch(config-dhcp)#no netbios wins-server 10.1.1.100
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
