D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 367 van 761
DGS-6604 m/ mSW Rls. 1.00.029 netbios node-type
CLI Reference Guide
336
netbios node-type
This command is used to configure the NetBIOS node’s type for Microsoft
Dynamic Host Configuration Protocol (DHCP) clients. Use the no form of this
command to restore the configuration of the NetBIOS node’s type back to default
configuration (Hybrid).
netbios node-type NTYPE
no netbios node-type
Default NTYPE: h-node
Command Mode DHCP pool configuration
Usage Guideline This command configures the NetBIOS node’s type; the recommended type is h-
node (Hybrid). It determines what methods NetBios will use to register and
resolve names.
• b-node - The broadcast system uses broadcasts.
• p-node - A p-node system uses only point-to-point name queries to a
name server (WINS).
• m-node - An m-node system broadcasts first, and then queries the name
server.
• Hybrid - A hybrid system queries the name server first, and then broad-
casts.
Resolution through LMHOSTS and/or Domain Name Service (DNS), if enabled,
will follow these methods.
Example The following is sample of configuring the Netbios node type as h-node.
Syntax Description
NTYPE Specifies the type of NetBIOS node. Valid types are listed below:
• b-node - Broadcast
• p-node - Peer-to-peer
• m-node - Mixed
• h-node - Hybrid (recommended)
switch# configure terminal
switch(config)# ip dhcp pool pool1
switch(config-dhcp)# netbios node-type h-node
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
