D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 349 van 761
DGS-6604 m/ mSW Rls. 1.00.029 monitor session
CLI Reference Guide
318
be a source interface of one session and destination port of another ses-
sion simultaneously.
• For a destination port, all the layer 2 settings configured for this port are
all ineffective.
• IEEE 802.1x authentication on a port cannot be enabled for a destination
port, but is allowed on the source port.
Entering no monitor session without specifying a session number deletes all
port mirroring sessions.
Examples This example shows how to create a port mirroring session with session number
1. It assigns a physical port (eth3.1) as a destination port and three source
physical ports (eth3.2, eth3.3, and eth3.4) as mirrored ports.
This example shows how to remove two source ports from a created port
mirroring session with session number 1.
Verify the settings by entering the show monitor session command.
Switch# configure terminal
Switch(config)# monitor session 1 destination interface eth3.1
Switch(config)# monitor session 1 source interface eth3.2-3.4
Switch(config)# end
Switch# configure terminal
Switch(config)# no monitor session 1 source interface eth3.2,eth3.4
Switch(config)# end
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
