D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 346 van 761
DGS-6604 m/ mSW Rls. 1.00.029 max-rcv-frame-size
CLI Reference Guide
315
max-rcv-frame-size
Use the command to set the maximum Ethernet frame size allowed. Use the
default form to restore the default max-rcv-frame-size size.
max-rcv-frame-size BYTES
default max-rcv-frame-size
Default BYTES: 1536 bytes
Command Mode Interface command for physical port and port channel but not for VLAN.
Usage Guideline Oversize frames will be dropped and the check is done within the ingress ports.
Use the command to transfer large frames or jumbo frames through the switch
system to optimize server-to-server performance.
When a port is removed from the port-channel member list, the max-rcv-frame-
size setting for the port will be reset to the default setting.
Examples This example shows how to set max-rcv-frame-size as 6000 bytes at eth4.1
This example shows how to restore the default max-rcv-frame-size
Verify the settings by entering the show interface command.
Syntax Description
BYTES Set the maximum Ethernet frame size allowed. The range is 1536 to 9728 bytes.
Switch# configure terminal
Switch(config)# interface eth4.1
Switch(config-if) max-rcv-frame-size 6000
Switch(config-if)# end
Switch# configure terminal
Swtich(config)# interface eth4.1
Switch(config-if)# default max-rcv-frame-size
Switch(config-if)# end
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
