D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 324 van 761
DGS-6604 m/ mSW Rls. 1.00.029 lacp system-priority
CLI Reference Guide
293
lacp system-priority
Use the lacp system-priority command to configure the system priority used for
LACP ports. Use the no form to configure the system priority to the default.
lacp system-priority PRIORITY
no lacp system-priority
Default 32768.
Command Mode Global configuration
Usage Guideline During Link Aggregation Control Protocol (LACP) negotiation, the system priority
and port priority of the local partner are exchanged with the remote partner. If the
maximum number of actual members exceeds the limitation, the switch uses port
priority to determine whether the port status will be in backup mode or active
mode. The LACP system priority determines which switch controls the port
priority for the aggreagated link. The port priorities of the other switch are
ignored.
In a system priority comparison, a numerically lower value has a higher priority.
If two switches have the same system priority , the LACP system ID (MAC
address) determines the priority.
The LACP system priority command applies to all LACP port channels on the
switch.
Example This example shows how to configuration the system priority to 30000.
Verify the settings with the show channel-group command
Syntax Description
PRIORITY Specifies the system priority. The range is 1 to 65535.
Switch(config)# lacp system-priority 30000
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
