D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 317 van 761
DGS-6604 m/ mSW Rls. 1.00.029 key
CLI Reference Guide
286
K
key
Use the key command to identify a key on a key chain used for routing protocol
authentication. Use the no key command to remove the key from the key chain.
key KEY-ID
no key KEY-ID
Default There are no keys configured on the key chain.
Command Mode key-chain configuration
Usage Guideline Only Routing Information Protocol (RIP) Version 2 uses key chains.
Using the key command will enter into the key-chain key configuration mode.
It is useful to have multiple keys on a key chain so that the software can
sequence through the keys as they become invalid over a period of time. This is
based on the accept-lifetime, send-lifetime and key chain key command
settings.
If the last key expires, authentication will be invalid.
If there was a discrepancy in the set time of the router's keys, the first valid key
will be chosen.
To remove all keys, remove the key chain with the no key chain command.
Syntax Description
KEY-ID The iIdentification number of an authentication key of a key chain. The available
range for the key ID is a number from 0 to 2147483647, up to 32 key IDs can be
configured. The key identification numbers need not be consecutive.
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
