D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 311 van 761

DGS-6604 m/ mSW Rls. 1.00.029 ipv6 route
CLI Reference Guide
280
Practical Usage Operators may prefer to specify a default path for the managed devices. By
specifying a default gateway, traffic inside the managed topology always has the
proper path to follow. Usually, routers on smaller networks may need this
configuration, since they have less CPU computing power or less memory to
keep the entire routing table of the topology.
Examples Imagine the topology is illustrated below. The device on the edge may not have
enough power to forward all the IPv6 traffic to the world. Therefore, it needs a
default route to serve the connected IPv6 nodes to communicate with nodes on
Internet.
This example shows how to create a default route.
After configuring the default route, the edge router will forward the unknown IPv6
traffic to the core router. By doing this, users connected to the edge router can
connect to the world (WAN/internet).
This example shows how to delete an existing default route.
Configuring a
General Static
Route
To establish static IPv6 routes, use the ipv6 route command in global
configuration mode. To remove a previously configured static route, use the no
form of this command.
Default No static routes are configured.
Switch > enable
Switch # configure terminal
Switch (config) # ipv6 route ::/0 vlan 1 fe80::0200:00ff:fe00:a0a0
Switch > enable
Switch # configure terminal
Switch (config) # no ipv6 route ::/0 vlan 1 fe80::0200:00ff:fe00:a0a0
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |







