D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 289 van 761
DGS-6604 m/ mSW Rls. 1.00.029 ipv6 enable
CLI Reference Guide
258
ipv6 enable
This command is used to enable and disable the IPv6 protocol on an interface of
the switch. The no form of this command can disable the IPv6 protocol.
ipv6 enable
no ipv6 enable
Syntax None
Default Disabled.
Command Mode VLAN interface configuration
Usage Guideline The interface must be created before the ipv6 enable command is executed.
When the interface up, ipv6 enable will also add a link-local address to the
interface and remove it when using the no form of the command. This means that
when using ipv6 enable, depending whether the interface is up or down, the
command will add or delete the link-local address respectively.
Example This example shows how to enable the IPv6 protocol:
Switch> enable
Switch# configure terminal
Switch(config)# interface vlan1
Switch(config-if)# ipv6 enable
Switch(config-if)#
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
