D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 265 van 761
DGS-6604 m/ mSW Rls. 1.00.029 ip rip receive version
CLI Reference Guide
234
ip rip receive version
Use this command to specify a RIP version to receive on each interface. Use the
no form of the command to let the version follow the setting specified in the router
configuration mode.
ip rip receive version VERSION-ID [ , | - ]
no ip rip receive version
Default Global RIP version receive setting
Command Mode Interface configuration
Usage Guideline This command applies only to the interface being configured.
Examples The following example shows how to configure interface (VLAN 1) to accept both
RIP Version 1 and Version 2 packets:
The following example shows how to configure the interface (VLAN 1) to only
accept RIP Version 1 packets:
Verify the settings by entering the show ip rip interface command.
Syntax Description
VERSION-ID The Version ID can be either 1 or 2. That is RIP accepts only RIP Version 1
packets on the interface or accepts only RIP Version 2 packets on the interface.
It also can be a list of version IDs such as 1,2 (or 1-2), meaning that both RIP
Version 1 and Version 2 packets are acceptable on the RIP enabled interface.
Switch# configure terminal
Switch(config)# interface vlan1
Switch(config-if)# ip rip receive version 1-2
Switch(config-if)# end
Switch# configure terminal
Switch(config)# interface vlan1
Switch(config-if)# ip rip receive version 1
Switch(config-if)# end
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
