D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 254 van 761
DGS-6604 m/ mSW Rls. 1.00.029 ip pim prune-limit-interval
CLI Reference Guide
223
ip pim prune-limit-interval
Use this command to configure the time interval for the prune limit timer to limit
the Pruning rate on a LAN.
ip pim prune-limit-interval SECONDS
Default 210 seconds
Command Mode VLAN interface configuration
Usage Guideline This command is only valid for the VLAN interface.
This command is valid for PIM-DM only.
This interval is used to configure prune-limit-timer which limits the Pruning rate
on a LAN. It is only used when the Upstream(S,G) state machine is in the Pruned
state. A Prune cannot be sent if this timer is running. This timer is normally set to
default value 210 seconds.
Example The following example configures interface VLAN 1 with the PIM prune limit
timer interval set to 120 seconds.
Verify the settings by entering the show ip pim interface command.
Syntax Description
SECONDS Specifies the value of Prune Limit Timer (in seconds), which is used to prevent
Prune storms on a LAN. The range is 1 to 18000.
Switch(config)# interface vlan1
Switch(config-if)# ip pim prune-limit-interval 120
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
