D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 235 van 761
DGS-6604 m/ mSW Rls. 1.00.029 ip mtu
CLI Reference Guide
204
ip mtu
Use this command to set the MTU value in TCP/IP stack. Use the default form to
restore to the default ip mtu size.
ip mtu BYTES
default ip mtu
Default 1500 bytes
Command Mode VLAN interface configuration
Usage Guideline IP packets sent by the device will be fragmented based on this value.
Some routing protocols, such as OSPF, will use this value to advertise routing
updates.
Examples This example shows how to set ip mtu as 6000 bytes at vlan 4.
This example shows how to restore the default ip mtu.
Verify the settings by entering the show interface command.
Syntax Description
BYTES Set the IP MTU value in TCP/IP stack. The range is 1280 to 9692 bytes.
Switch# configure terminal
Switch(config)# interface vlan4
Switch(config-if) ip mtu 6000
Switch(config-if)# end
Switch# configure terminal
Swtich(config)# interface vlan4
Switch(config-if)# default ip mtu
Switch(config-if)# end
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
