D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 213 van 761
DGS-6604 m/ mSW Rls. 1.00.029 ip dhcp relay information trusted
CLI Reference Guide
182
ip dhcp relay information trusted
Use this interface command to direct the DHCP relay agent to accept the packets
with giaddr==0 (this relay agent is the first relay of this DHCP request packet)
and relay agent information option is already present in the packet. Use the no
form of the command to configure to drop these DHCP request packet.
ip dhcp relay information trusted
no ip dhcp relay information trusted
Syntax None
Default The interface default is un-trusted.
Command Mode VLAN interface configuration
Usage Guideline When IP DHCP relay information is trusted, if the gateway address in the DHCP
request packet is set to all zeros but the relay agent information option is already
present in the packet, the DHCP relay agent will accept the packet.
If it is un-trusted, then the packet will be discarded.
Example This example shows how to enabled interface vlan100's DHCP relay agent to
accept the packets with giaddr==0 and relay agent information option is already
present in the packet.
Verify the settings by entering the show ip dhcp relay information trusted-
sources command.
Switch# configure
Switch# interface vlan100
Switch(config-if)# ip dhcp relay information trusted
Swtich(config-if)# end
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
