D-Link DGS-6600-PWR handleiding

761 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 209 van 761
DGS-6604 m/ mSW Rls. 1.00.029 ip dhcp relay information option
CLI Reference Guide
178
ip dhcp relay information option
Use this command to enable the insertion of the relay agent information option
(option 82). Use the no form of the command to disable this function.
ip dhcp relay information option
no ip dhcp relay information option
Syntax None
Default Disabled
Command Mode Global configuration
Usage Guideline Use this command to enable insertion of DHCP option 82.
When the DHCP 82 option is enabled, a DHCP packet received from a client will
have the option 82 field inserted before being relayed to the server. The DHCP
option 82 contains 2 suboptions: circuit ID and remote ID sub-options.
If the switch is standalone then the module field, within the circuit ID suboption, is
always set to zero. The following describes the format of the Circuit and Remote
ID suboption formats:
Circuit ID
suboption
format:
VLAN ID - The incoming VLAN ID of DHCP client packet.
Module # - For a standalone switch, Module # is always 0; For a stackable
switch, Module is Unit ID.
Port # - The receiving port number of DHCP client packet, port number starts
from 1.
Remote ID
suboption
format:
MAC address: the switch's system MAC address.
Byte 1 23 4 5678
Field
Sub-option
Type
Length
Circuit
IDType
Length
VLAN ID
Module # Port #
Value 1 6 0 4 X X X
Byte 1 2 3 4 5 6 7 8 9 10
Field
Sub-option
Type
Length
Remote
ID Type
Length MAC Address
Value 2 8 0 6 M1M2 M3 M4M5M6

Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkD-Link
ModelDGS-6600-PWR
CategorieNiet gecategoriseerd
TaalNederlands
Grootte52758 MB

Caratteristiche Prodotto

Kleur van het productGrijs
Breedte- mm
Diepte- mm
Hoogte- mm
Geluidsniveau- dB