D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 188 van 761
DGS-6604 m/ mSW Rls. 1.00.029 ingress-checking
CLI Reference Guide
157
I
ingress-checking
Use the ingress-checking to enable ingress frame checking at a port. Use the
no ingress-checking to disable the ingress frame checking function.
ingress-checking
no ingress-checking
Syntax None
Default Enabled
Command Mode Interface configuration
Usage Guideline The valid interfaces for this command are physical ports.
Use the ingress-checking interface command to enable ingress checking at the
switch interfaces. When ingress checking is enabled, if the port is not a member
port of the VLAN associated with the incoming frames, the frames will be
dropped. Use the no ingress-checking interface command to disable this
function of a port.
Example This example shows how to set ingress checking to enabled at ethernet port 4.1.
Verify the settings by entering the show vlan interface command.
Switch(config)# interface eth4.1
Switch(config-if)# ingress-checking
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
