D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 184 van 761
DGS-6604 m/ mSW Rls. 1.00.029 gvrp timer
CLI Reference Guide
153
gvrp timer
Use the gvrp timer command to set the GVRP timer value for a port.
gvrp timer { join | leave | leave-all } TIMER-VALUE
Default join: 20
leave : 60
leave-all : 1000
Command Mode Interface configuration
Usage Guideline The value of these parameters must comply to the following rules:
1. LEAVE_TIMER >= 3 * JOIN_TIMER
2. LEAVE_ALL_TIMER > LEAVE_TIMER
Example This example shows how to set the leave-all timer to 5 seconds using the value
500 (hundredths of a second).
Verify the settings by entering the show gvrp configuration interface command.
Syntax Description
join Set the timer for joining the group. The unit is hundredths of a second.
leave Set the timer for leaving a group. The unit is hundredths of a second.
leave-all Set the time for leaving all groups. The unit is hundredths of a second.
TIMER-VALUE
<1-65535>
The timer value in hundredths of a second.
Switch(config)# interface eth3.1
Switch(config-if)# gvrp timer leave-all 500
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
